Body Protection Kit - Compatible w/ Arrma Kraton 6S

Elevate the durability of your Arrma Kraton 6S with our premium body protection kit, designed to safeguard critical areas and extend the life of your truck. Featuring robust roof skids, a fortified front body skid, and reinforced rear body skids, this kit strengthens vulnerable sections with style.

• Robust Roof Skids: Thicker than stock inserts, these skids replace factory body roof support skids (ARRMA #ARA-1515) and allow screws to recess deeper for a more secure, low-profile fit, reducing wear on the body’s roof.
• Front Body Skid: Engineered to prevent premature nose cracking, this skid reinforces the front end, ensuring your Kraton withstands intense impacts and rough terrain.
• Rear Body Skids: Dual reinforcement for the bed section, both inside and out, bolstering structural integrity to handle high-stress conditions and demanding runs.

**Package Includes**
1x Front Body Skid
2x Roof Skids
4x Rear Body Skids (2 exteriors, 2 interiors)
1x Set of Mounting Hardware
   -4x M3x10 / 4x M3 Nuts (Front Body Skid)
   -6x M4x12 / 6x M4 Nuts (Rear Body Skids)

Front & Rear Body Skids Installation Guide

Test-Fit Placement:
 Hold the front skid at the front of the body and the rear skids along the rear bed area. Use the product photos to guide correct positioning. Make sure they’re centered and level.

Mark the Mounting Holes:
 With the skids in place, use a fine marker to mark the hole locations through the mounting holes onto the body shell.

Make the Holes (Reamer Recommended):
 Using an RC body reamer, carefully open each hole. This prevents cracks and ensures the screw fits well.
 (If needed, a 3mm drill bit will work—but be cautious and drill slowly.)

Rear Skid Only – Add Interior Mounts:
 Place the larger interior mounts inside the body so they align with the exterior rear skid holes(indents will face upwards towards the body and slip under the mounting bracket).

Attach Everything:
 - Front: Insert the included M3 screws through the skid and body, and secure with M3 locknuts on the inside.
 - Rear: Insert M4 screws through the exterior skid, body, and into the interior mount. Tighten with M4 locknuts from inside.

   
**Compatibility**
Arrma Kraton 6S & EXB


Front Body Skid Design Credits Belong To - Robschii