Body Protection Kit - Compatible w/ Arrma Kraton 8S

Elevate the durability of your Arrma Kraton 8S with our premium body protection kit, designed to safeguard critical areas and extend the life of your truck. Featuring robust roof skids, a fortified front body skid, and reinforced rear body skids, this kit strengthens vulnerable sections with style.

• Robust Roof Skids: Thicker than stock inserts, these skids replace factory body roof support skids (ARRMA #ARA480020) and allow screws to recess deeper for a more secure, low-profile fit, reducing wear on the body’s roof.
• Front Body Skid: Engineered to prevent premature nose cracking, this skid reinforces the front end, ensuring your Kraton withstands intense impacts and rough terrain.
• Rear Body Skids: Dual reinforcement for the bed section, both inside and out, bolstering structural integrity to handle high-stress conditions and demanding runs.
• Thicker Body Washers: Comes with 4 Body Washers that provide more surface area for impact disbursement as well as added style.

**Package Includes**
1x Front Body Skid Bumper
2x Roof Skids
4x Body Post Washers
4x Rear Body Skids (2 exteriors, 2 interiors)
1x Set of Mounting Hardware
   -10x M4x12 / 10x M4 Nuts (Rear Body Skids)

Front & Rear Body Skids Installation Guide

Test-Fit Placement:
 Hold the front skid at the front of the body and the rear skids along the rear bed area. Use the product photos to guide correct positioning. Make sure they’re centered and level.

Mark the Mounting Holes:
 With the skids in place, use a fine marker to mark the hole locations through the mounting holes onto the body shell.

Make the Holes (Reamer Recommended):
 Using an RC body reamer, carefully open each hole. This prevents cracks and ensures the screw fits well.
 (If needed, a 3mm drill bit will work—but be cautious and drill slowly.)

Rear Skid Only – Add Interior Mounts:
 Place the larger interior mounts inside the body so they align with the exterior rear skid holes..

Attach Everything:
 - Insert M4 screws through the exterior skid, body, and into the interior mount. Tighten with M4 locknuts from inside.

   
**Compatibility**
Arrma Kraton 8S & EXB