Carbon Fiber Wing - Compatible w/ Arrma Kraton 1/5

Enhance your 1/5th Arrma Kraton with our Carbon Fiber Wing, built to dominate over the stock plastic wing in flair and style. Its lightweight carbon fiber construction adds durability while our rubber-like blade reinforcements help soften the blow of crashes, helping your wing last longer and look cleaner.  *Assembly Required* (Takes 5-10min at max)

*Package Includes* 
12x M4x12 Screws
2x   M4x20 Screws
12x M4 Lock Nuts ( preset into rubber blades )
3x CF Plates (F, M & R)

Front plate: features fin indents and should face forward.
Middle plate: the widest plate with two center holes positioned toward the rear.
Rear plate: the smaller rectangular plate. This will sit at an angle toward the rear once installed.

Assembly Instructions (First-Time Setup):

1. Begin by laying out the three carbon fiber plates and identifying each one.

2. To assemble the side wing blade, lay the wing blade flat and align each carbon fiber plate with its corresponding indent. Insert the M4 screws while keeping the locknuts properly aligned. Light pressure with your fingers or a pair of pliers can help hold everything in place during installation.

3. Repeat the same process for the opposite side.

4. Once both sides are installed and tightened, use the included hardware to secure the wing to the mount.

5. Final step: ensure everything is tight and properly aligned. The setup is now complete and ready to run.

**Stock Side Blades will be BLACK! If you would like a different color, please leave a note at checkout**